• Description
  • Documentation
  • Downloads
  • Accessories

The ultimate USB DMX box with more features than anything else on the market. From basic Enttec Pro compatibility mode right through to full on Art-Net/sACN we've got everything covered including standalone show playback of any complexity and duration.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the ultraDMX2 PRO is the perfect choice for small to medium rigs. DMX merge functionality works from both Art-Net/sACN, DMX Input and USB DMX sources providing plenty of configuration possibilities. Designed and manufactured in New Zealand to the highest standards.

Firmware v3.0+ ultraDMX2 PRO includes show recording and playback from microSD card and Universe Sync functionality.

Use with the DJ focused SoundSwitch, FreeStyler, LightKey, QLC+, LightFactory, your favorite console and many more.

Main Features

  • Static IP or DHCP network addressing. Ships with DHCP enabled.
  • Fully compatible with software suitable for ENTTEC USB DMX Pro. Drivers for Windows, OS X, Linux.
  • ultraDMX2 PRO - 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support.
  • DMX512 Out or DMX512 In functionality selectable on each port.
  • Merge 2 incoming Art-Net/sACN streams per output channel with both HTP and LTP options.
  • Merge Art-Net/sACN + DMX input -> DMX output.
  • Merge DMX input + USB DMX source -> DMX output.
  • USB DMX enhanced mode for 2 Universe Out or 1 In 1 Out.
  • 1500V Isolation between every port.
  • Art-Net broadcast, Art-Net II, III & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
  • E1.20 RDM over Art-Net support.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • User configuration of Art-Net Node short and long names.
  • Compact tough metal enclosure.
  • Available with 3 pin or 5 pin XLR sockets.
  • Accessory port for external show triggering and future add on devices.
  • Fully compatible with *ALL* software and hardware that supports Art-Net, Art-Net II, III & 4, and sACN protocols.
  • Fully compatible with lighting consoles capable of generating Art-Net or sACN protocol.
  • Configuration utility with basic Art-Net output/input test functionality.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without computer or network connection.
  • Firmware updates can be performed by end user.

FAQ: What's the difference between ultraDMX2 PRO and eDMX2 PRO? ultraDMX2 PRO does not include 802.3af Power over Ethernet nor does it have an Ethercon network socket.

Firmware versions - We recommend you use the latest version!
Version Description Filename
3.0 -Initial firmware release. 0113-500-3.0.enc
3.1 ArtNet 4 NodeReport messages with BindIndex, NodeReport status messages, Dynamic IGMP reporting based on current port configurations. 0113-500-3.1.enc
3.3 Record/playback enhancements. 0113-500-3.3.enc
3.5 CR+LF no longer required on last script line, USB DMX assigned universe now follows Port A/B universe setting, Basic device configuration via USB. 0113-500-3.5.enc
3.7 DMXworkshop excess ArtPoll bytes accepted, Full frame DMX512 option DMX-IN & DMX-OUT, Broadcast ArtNet playback over network, ArtPollReply includes UID report, ArtNet fail safe modes, NTP time sync and time zone with DST, DMX-IN & DMX-OUT re-mapping channel offset, Timeout all sources for DMX-IN, sACN CID fix for multiple DMX-IN ports on same universe, sACN Universe Sync enhancements, Recording from DMX-IN sources, Default Gateway added to ArtIpProg, Numerous Record/playback enhancements (see eDMX Recorder manual). 0113-500-3.7.enc
3.8 ArtPollReply message excess byte trimmed, Volume label report, End of show playback timing for improved show looping. 0113-500-3.8.enc
3.9 Improved merge source handling at end of show playback for seamless looping with merge. Master script final show entry now checks individual show script. 0113-500-3.9.enc
3.10 ArtPoll handling fix for Madrix. 0113-500-3.10.enc
3.11 Alternate ArtNet port added. NTP time sync at startup increased attempts. DMX-OUT Channel offset with Full Frame option now correctly handled. RDM Discovery message PortID corrected. RDM message length error corrected. 0113-500-3.11.enc
3.12 RDM functionality where physical ports have same universe allocated. YAML configuration file load from SD card. ArtNet universe data accepted from alternate ArtNet port alongside standard ArtNet port. 0113-500-3.12.enc
3.13 CRON tab entries expanded to 20. CRON run option to delay start until NTP response. Special feature request for 24hr long show skip ahead to current time upon start. Snapshot scene load/update from SD card upon startup. Snapshot write to SD card file. 0113-500-3.13.enc