• Description
  • Documentation
  • Downloads
  • Accessories

Designed for DIN rail cabinet installations in tough electrical environments. eDMX4 PRO ISODIN provides ANSI E1.11 Higher Protection Level on all DMX512-A ports so they'll survive high voltage transients and other unusual line conditions. Port protection is identical to the highly reliably eDMX4 PRO product.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the eDMX4 PRO ISODIN is an ideal choice for universe hungry lighting installations. Flexible configuration permits 2 input DMX merge functionality too. Designed and manufactured in New Zealand to the highest standards. DIN rail mounting included.

 

Main Features

  • Static IP or DHCP network addressing.
  • Supported operating systems: Any with Ethernet networking support. Windows, MAC OS, Linux, iOS, Android....
  • eDMX4 PRO ISODIN - 4x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support
  • Merge 2 incoming Art-Net streams per output channel with both HTP and LTP options
  • Merge Art-Net + DMX input -> DMX output(s)
  • Merge 2x DMX input -> DMX output(s)
  • sACN Priority takeover for multi-tier controller arrangements
  • Mix and match ArtNet with sACN merge/priority sources
  • 1500V Isolation between every port
  • DIN Rail mounting
  • E1.11 Higher Protection Level “DMX512-A Protected” device.
  • Fully compatible with *ALL* software and hardware that supports Art-Net I, II, 3 & 4 and sACN protocols.
  • Works with your existing console if Art-Net or sACN external nodes are supported.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without computer or network connection.
  • Accessory port for external show triggering and future add on devices.
  • Configuration utility with basic Art-Net output/input test functionality.
  • Firmware updates can be performed by end user.

Firmware versions - We recommend you use the latest version!
Version Description Filename
3.5 Initial firmware release. 0118-500-3.5.enc
3.6 Port A-D startup issues with eDMX4 PRO ISODIN resolved. Replaces initial firmware release. 0118-500-3.6.enc
3.7 DMXworkshop excess ArtPoll bytes accepted, Full frame DMX512 option DMX-IN & DMX-OUT, Broadcast ArtNet playback over network, ArtPollReply includes UID report, ArtNet fail safe modes, NTP time sync and time zone with DST, DMX-IN & DMX-OUT re-mapping channel offset, Timeout all sources for DMX-IN, sACN CID fix for multiple DMX-IN ports on same universe, sACN Universe Sync enhancements, Recording from DMX-IN sources, Default Gateway added to ArtIpProg, Numerous Record/playback enhancements (see eDMX Recorder manual). 0118-500-3.7.enc
3.8 ArtPollReply message excess byte trimmed, Volume label report, End of show playback timing for improved show looping. 0118-500-3.8.enc
3.9 Improved merge source handling at end of show playback for seamless looping with merge. Master script final show entry now checks individual show script. 0118-500-3.9.enc
3.10 ArtPoll handling fix for Madrix. 0118-500-3.10.enc
3.11 Alternate ArtNet port added. NTP time sync at startup increased attempts. DMX-OUT Channel offset with Full Frame option now correctly handled. RDM Discovery message PortID corrected. RDM message length error corrected. 0118-500-3.11.enc
3.12 RDM functionality where physical ports have same universe allocated. YAML configuration file load from SD card. ArtNet universe data accepted from alternate ArtNet port alongside standard ArtNet port. 0118-500-3.12.enc
3.13 CRON tab entries expanded to 20. CRON run option to delay start until NTP response. Special feature request for 24hr long show skip ahead to current time upon start. Snapshot scene load/update from SD card upon startup. Snapshot write to SD card file. 0118-500-3.13.enc