ultraDMX2 PROultraDMX2 PRO

.. ultraDMX2 PRO ..

RRP $179USD

  • Description
  • Documentation
  • Downloads
  • Accessories

The ultimate USB DMX box with more features than anything else on the market. From basic Enttec Pro compatibility mode right through to full on Art-Net/sACN we've got everything covered including standalone show playback of any complexity and duration.

Supporting both DMX512 output and DMX512 input individually configurable on each channel along with Art-Net and sACN protocols the ultraDMX2 PRO is the perfect choice for small to medium rigs. DMX merge functionality works from both Art-Net/sACN, DMX Input and USB DMX sources providing plenty of configuration possibilities. Designed and manufactured in New Zealand to the highest standards.

Firmware v3.0+ ultraDMX2 PRO includes show recording and playback from microSD card and Universe Sync functionality.

Use with the DJ focused SoundSwitch, FreeStyler, LightKey, QLC+, LightFactory, your favorite console and many more.

Main Features

  • Static IP or DHCP network addressing. Ships with DHCP enabled.
  • Fully compatible with software suitable for ENTTEC USB DMX Pro. Drivers for Windows, OS X, Linux.
  • ultraDMX2 PRO - 2x DMX512 Out or DMX512 In with Art-Net, sACN E1.31 and E1.20 RDM support.
  • DMX512 Out or DMX512 In functionality selectable on each port.
  • Merge 2 incoming Art-Net/sACN streams per output channel with both HTP and LTP options.
  • Merge Art-Net/sACN + DMX input -> DMX output.
  • Merge DMX input + USB DMX source -> DMX output.
  • USB DMX enhanced mode for 2 Universe Out or 1 In 1 Out.
  • 1500V Isolation between every port.
  • Art-Net broadcast, Art-Net II, III & 4 unicast, sACN/E1.31 Multicast and sACN Unicast support.
  • E1.20 RDM over Art-Net support.
  • Universe Sync Art-Net, sACN and Madrix Post Sync.
  • User configuration of Art-Net Node short and long names.
  • Compact tough metal enclosure.
  • Available with 3 pin or 5 pin XLR sockets.
  • Accessory port for external show triggering and future add on devices.
  • Fully compatible with *ALL* software and hardware that supports Art-Net, Art-Net II, III & 4, and sACN protocols.
  • Fully compatible with lighting consoles capable of generating Art-Net or sACN protocol.
  • Configuration utility with basic Art-Net output/input test functionality.
  • Recording and playback to microSD card (not included). See eDMX PRO Record / Playback manual.
  • Standalone show playback without computer or network connection.
  • Firmware updates can be performed by end user.

FAQ: What's the difference between ultraDMX2 PRO and eDMX2 PRO? ultraDMX2 PRO does not include 802.3af Power over Ethernet nor does it have an Ethercon network socket.

Firmware versions - We recommend you use the latest version!
Version Description Filename
3.0 -Initial firmware release. 0113-500-3.0.enc
3.1 ArtNet 4 NodeReport messages with BindIndex, NodeReport status messages, Dynamic IGMP reporting based on current port configurations. 0113-500-3.1.enc
3.3 Record/playback enhancements. 0113-500-3.3.enc
3.5 CR+LF no longer required on last script line, USB DMX assigned universe now follows Port A/B universe setting, Basic device configuration via USB. 0113-500-3.5.enc
3.7 DMXworkshop excess ArtPoll bytes accepted, Full frame DMX512 option DMX-IN & DMX-OUT, Broadcast ArtNet playback over network, ArtPollReply includes UID report, ArtNet fail safe modes, NTP time sync and time zone with DST, DMX-IN & DMX-OUT re-mapping channel offset, Timeout all sources for DMX-IN, sACN CID fix for multiple DMX-IN ports on same universe, sACN Universe Sync enhancements, Recording from DMX-IN sources, Default Gateway added to ArtIpProg, Numerous Record/playback enhancements (see eDMX Recorder manual). 0113-500-3.7.enc
3.8 ArtPollReply message excess byte trimmed, Volume label report, End of show playback timing for improved show looping. 0113-500-3.8.enc
3.9 Improved merge source handling at end of show playback for seamless looping with merge. Master script final show entry now checks individual show script. 0113-500-3.9.enc
3.10 ArtPoll handling fix for Madrix. 0113-500-3.10.enc